CAL MAXVU Panel PID Temperature Controller 1 Input, 3 Output Solid State Relay24 V Temperature Control
- N° de stock RS:
- 106-5432
- Référence fabricant:
- TLI4970D025T4XUMA1
- Fabricant:
- CAL
Offre groupée disponible
Sous-total (1 unité)*
7,37 €
(TVA exclue)
8,92 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 23 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 7,37 € |
| 5 - 9 | 6,71 € |
| 10 - 19 | 6,14 € |
| 20 - 49 | 5,67 € |
| 50 + | 5,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 106-5432
- Référence fabricant:
- TLI4970D025T4XUMA1
- Fabricant:
- CAL
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | CAL | |
| Product Type | PID Temperature Controller | |
| Output Type | Solid State Relay | |
| Number of Inputs | 1 | |
| Number of Outputs | 3 | |
| Maximum Current | 2A | |
| Maximum Operating Temperature | 55°C | |
| Minimum Operating Temperature | 0°C | |
| Control Type | Temperature Control | |
| Maximum Supply Voltage | 24V | |
| Digital Comms | RS485 Modbus RTU | |
| Maximum Voltage | 250V | |
| IP Rating | IP20, IP65 | |
| Standards/Approvals | EN61010-1, CE, EN61326, UL61010-1 | |
| Length | 96mm | |
| Series | MAXVU | |
| Mount Type | Panel | |
| Panel Depth | 67mm | |
| Sélectionner tout | ||
|---|---|---|
Marque CAL | ||
Product Type PID Temperature Controller | ||
Output Type Solid State Relay | ||
Number of Inputs 1 | ||
Number of Outputs 3 | ||
Maximum Current 2A | ||
Maximum Operating Temperature 55°C | ||
Minimum Operating Temperature 0°C | ||
Control Type Temperature Control | ||
Maximum Supply Voltage 24V | ||
Digital Comms RS485 Modbus RTU | ||
Maximum Voltage 250V | ||
IP Rating IP20, IP65 | ||
Standards/Approvals EN61010-1, CE, EN61326, UL61010-1 | ||
Length 96mm | ||
Series MAXVU | ||
Mount Type Panel | ||
Panel Depth 67mm | ||
- Pays d'origine :
- MY
3D Printer Heater Mats
Silicone heater mat technology delivers improved 3D Printer quality and speed of process. The heater mans are thin and lightweight and have a low thermal mass. Due to this low mass, the mats have rapid heat up characteristics and fast response to temperature control. The 3D heater mats wide operating temperature range, flexibility and superb electrical properties give it a distinct advantage over other forms of heating.
Within the heated build platform (HBP) of a 3D Printer, printing quality is improved by having the platform accurately and uniformly heated. As extruded plastic cools it shrinks slightly, when this shrinking process occurs unevenly the printed component can result in warped parts.
Features and Benefits
• Designed to suit common 3D Printer flat bed
• Backing adhesive from Nitto, no loss in performance
• Etched Foil heating elements
• Operating temperature +180°C (intermittent maximum due to adhesive) 150°C continuous use
• Consistent and even temperatures eliminate quality concerns
• All units supplied with instruction leaflet
• PTFE braided thermocouple type J incorporated offering universal controllability
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.